Punch® Loaded

The P1-1X12 is a single P1 12” vented enclosure with 250 Watts RMS power handling wired to a 4-Ohm load. The enclosure is constructed with 5/8” MDF, covered in high density carpet, and features quick release compression terminals.

• Constructed with 5/8″ MDF
• Proprietary high-flow, low-noise port
• High current binding posts

The P1-2X10 is a dual P1 10” vented enclosure with 500 Watts RMS power handling wired to a 2-Ohm load. The enclosure is constructed with 5/8” MDF, covered in high density carpet, and features quick release compression terminals.

• Constructed with 5/8″ MDF
• Proprietary high-flow, low-noise port
• High current binding posts

The P2-1X12 is a single P2 12” vented enclosure with 400 Watts RMS power handling wired to a 1-Ohm load. The enclosure is constructed with 5/8” MDF, covered in high density carpet, and features quick release compression terminals.

• Proprietary high-flow, low-noise port
• Constructed with 5/8″ MDF
• High current binding posts

The P2-2X10 is a dual P2 10” vented enclosure with 600 Watts RMS power handling wired to a 1-Ohm load. The enclosure is constructed with 5/8” MDF, covered in high density carpet, and features quick release compression terminals.

• Proprietary high-flow, low-noise port
• Constructed with 5/8″ MDF
• High current binding posts

The P3-1X12 is a single P3 12” vented enclosure with 600 Watts RMS power handling wired to a 1-Ohm load. The enclosure is constructed with 5/8” MDF, covered in high density carpet, and features quick release compression terminals.

• Proprietary high-flow, low-noise port
• Constructed with 5/8″ MDF
• High current binding posts

The P3-2X10 is a dual P3 10” vented enclosure with 1000 Watts RMS power handling wired to a 1-Ohm load. The enclosure is constructed with 5/8” MDF, covered in high density carpet, and features quick release compression terminals.

• Proprietary high-flow, low-noise port
• Constructed with 5/8″ MDF
• High current binding posts

The P300-12 powered subwoofer is an “all-in-one” solution when adding bass to a factory system or just to save space. This model features a 12” subwoofer in a sealed enclosure powered by an internal 300 watt amplifier.

• “Closed-loop” design ensures optimum performance between woofer, amplifier and enclosure
• Built-in 0°/180° phase switch
• Separate low level and speaker level inputs
• Built-in adjustable bass boost EQ
• Adjustable 12db/Octave low pass crossover
• Detachable Power/Ground connector
• Intelligent auto turn on/off function
• Thermal and over voltage protection
• High-efficiency, low current design
• Remote bass level control included
• Proprietary high output woofer
• Constructed with 5/8″ MDF
• Large AWG input terminals
• Covered with industrial heat activated vinyl

The P3S-1X10 is a single 1” Punch Shallow subwoofer rated at 300 Watts RMS loaded in a sealed enclosure. This subwoofer enclosure is internally wired to a 1-Ohm load and features 5/8” MDF and 10 AWG quick-release input terminals.

• Sealed truck box style enclosure
• Constructed with 5/8″ MDF
• 10 AWG input terminals
• 1-Ohm wired impedance
• Computer optimized design
• Covered with high density carpet
• Wired exclusively with Rockford Fosgate speaker cable
• Included trim ring ready to accept optional stamped mesh grille insert