Power Subwoofers
Showing 1–24 of 27 results
-
Mobile subwoofers, Power Subwoofers, Rockford Fosgate
Rockford Fosgate T0D215 Power 15″ T0 2-Ohm DVC Subwoofer
Mobile subwoofers, Power Subwoofers, Rockford FosgateRockford Fosgate T0D215 Power 15″ T0 2-Ohm DVC Subwoofer
Power 15″ T0 2-Ohm DVC Subwoofer
The T0D215 subwoofer mimics its performance and design from our older Power Series brothers. Our T0 15” features dual 2-Ohm voice coils, 800 Watts RMS power handling, and includes a grille with integral trim ring.
- Anodized aluminum heat sinking dust cap
- Anodized aluminum voice coil former
- High-temp voice coil with spun-laced Nomex® re-inforcement collar
- Kevlar fiber reinforced paper cone
- Optimized and matched magnetic and complicance geometry
- Optimized pole piece and spider venting
- Periodic-stitched fatigue resistant tinsel lead wire
- Proprietary 8 AWG insulated allmetal input spring terminal connection
- Rigid die-cast aluminum basket
SKU: n/a -
Mobile subwoofers, Power Subwoofers, Rockford Fosgate
Rockford Fosgate T0D415 Power 15″ T0 4-Ohm DVC Subwoofer
Mobile subwoofers, Power Subwoofers, Rockford FosgateRockford Fosgate T0D415 Power 15″ T0 4-Ohm DVC Subwoofer
Power 15″ T0 4-Ohm DVC Subwoofer
The T0D415 subwoofer mimics its performance and design from our older Power Series brothers. Our T0 15” features dual 4-Ohm voice coils, 800 Watts RMS power handling, and includes a grille with integral trim ring.
- Anodized aluminum heat sinking dust cap
- Anodized aluminum voice coil former
- High-temp voice coil with spun-laced Nomex® re-inforcement collar
- Kevlar fiber reinforced paper cone
- Optimized and matched magnetic and complicance geometry
- Optimized pole piece and spider venting
- Periodic-stitched fatigue resistant tinsel lead wire
- Proprietary 8 AWG insulated allmetal input spring terminal connection
- Rigid die-cast aluminum basket
SKU: n/a -
Power Subwoofers
Rockford Fosgate T1D210 Power 10″ T1 2-Ohm DVC Subwoofer
The Power Series T1D410 Dual 4-Ohm subwoofer builds on innovative new Rockford Fosgate technologies. These bad boys have patented VAST technology that increases surface cone area up to 25% so the T1D410 performs like a much larger woofer over the previous model. The new FlexFit basket not only looks the.
SKU: n/a -
Power Subwoofers
Rockford Fosgate T1D212
Innovative technologies allow the T1D212 subwoofer to perform like a larger woofer over the previous model. The T1 12” features dual 2-Ohm voice coils, 800 Watts RMS power handling, and includes a grille with integral trim ring.
- Symmetrical dual progressive roll tear resistant poly-cotton spiders
- Periodic-stitched fatigue resistant tinsel lead wire
- Proprietary 8 AWG insulated allmetal input spring terminal connection
- High-temp voice coil with spun-laced Nomex® re-inforcement collar
- Optimized and matched magnetic and complicance geometry
- Anodized aluminum heat sinking dust cap
- Kevlar fiber reinforced paper cone
- Rigid die-cast aluminum basket
- Optimized pole piece and spider venting
- Anodized aluminum voice coil former / copper clad aluminum wire
SKU: n/a -
Mobile subwoofers, Power Subwoofers, Rockford Fosgate
Rockford Fosgate T1S1-10 Power 10″ T1 Slim Single 1-Ohm Subwoofer
Mobile subwoofers, Power Subwoofers, Rockford FosgateRockford Fosgate T1S1-10 Power 10″ T1 Slim Single 1-Ohm Subwoofer
Power 10″ T1 Slim Single 1-Ohm Subwoofer
The Power T1S1-10 is a slimline 10″ subwoofer designed for spaces where traditional sized woofers will not fit. Features a single 1-ohm voice coil for simplified wiring configurations.
- Carbon fiber/PMI/glass fiber cone with aluminum dustcap
- Injection molded foam surround with VAST™
- Dual Nomex progressive spiders with integrated lead wires
- Aluminum diecast frame with integrated heat sink fins
- Custom insulated push spring 10 AWG terminals
- Dual wound 2.5″ voice coil with interior/exterior windings
- Encapsulating voice coil to former coupling technology (patent pending)
- Detachable die cast aluminum trim ring
- Vented pole piece
- High temp high energy neodymium motor structure
- Proprietary split yoke pass thru motor technology (patent pending)
- Integrated copper cap heat sinking shorting ring (IDHS)
- Optional grille insert available
- Optimized for sealed enclosures
SKU: n/a -
Mobile subwoofers, Power Subwoofers, Rockford Fosgate
Rockford Fosgate T1S1-12 Power 12″ T1 Slim Single 1-Ohm Subwoofer
Mobile subwoofers, Power Subwoofers, Rockford FosgateRockford Fosgate T1S1-12 Power 12″ T1 Slim Single 1-Ohm Subwoofer
Power 12″ T1 Slim Single 1-Ohm Subwoofer
The Power T1S1-12 is a slimline 12″ subwoofer designed for spaces where traditional sized woofers will not fit. Features a single 1-ohm voice coil for simplified wiring configurations.
- Carbon fiber/PMI/glass fiber cone with aluminum dustcap
- Injection molded foam surround with VAST™
- Dual Nomex progressive spiders with integrated lead wires
- Aluminum diecast frame with integrated heat sink fins
- Custom insulated push spring 10 AWG terminals
- Dual wound 2.5″ voice coil with interior/exterior windings
- Encapsulating voice coil to former coupling technology (patent pending)
- Detachable die cast aluminum trim ring
- Vented pole piece
- High temp high energy neodymium motor structure
- Proprietary split yoke pass thru motor technology (patent pending)
- Integrated copper cap heat sinking shorting ring (IDHS)
- Optional grille insert available
- Optimized for sealed enclosures
SKU: n/a -
Mobile subwoofers, Power Subwoofers, Rockford Fosgate
Rockford Fosgate T1S2-10 Power 10″ T1 Slim Single 2-Ohm Subwoofer
Mobile subwoofers, Power Subwoofers, Rockford FosgateRockford Fosgate T1S2-10 Power 10″ T1 Slim Single 2-Ohm Subwoofer
Power 10″ T1 Slim Single 2-Ohm Subwoofer
The Power T1S2-10 is a slimline 10″ subwoofer designed for spaces where traditional sized woofers will not fit. Features a single 2-ohm voice coil for simplified wiring configurations.
- Carbon fiber/PMI/glass fiber cone with aluminum dustcap
- Injection molded foam surround with VAST™
- Dual Nomex progressive spiders with integrated lead wires
- Aluminum diecast frame with integrated heat sink fins
- Custom insulated push spring 10 AWG terminals
- Dual wound 2.5″ voice coil with interior/exterior windings
- Encapsulating voice coil to former coupling technology (patent pending)
- Detachable die cast aluminum trim ring
- Vented pole piece
- High temp high energy neodymium motor structure
- Proprietary split yoke pass thru motor technology (patent pending)
- Integrated copper cap heat sinking shorting ring (IDHS)
- Optional grille insert available
- Optimized for sealed enclosures
SKU: n/a -
Mobile subwoofers, Power Subwoofers, Rockford Fosgate
Rockford Fosgate T1S2-12 Power 12″ T1 Slim Single 2-Ohm Subwoofer
Mobile subwoofers, Power Subwoofers, Rockford FosgateRockford Fosgate T1S2-12 Power 12″ T1 Slim Single 2-Ohm Subwoofer
Power 12″ T1 Slim Single 2-Ohm Subwoofer
The Power T1S2-12 is a slimline 12″ subwoofer designed for spaces where traditional sized woofers will not fit. Features a single 2-ohm voice coil for simplified wiring configurations.
- Carbon fiber/PMI/glass fiber cone with aluminum dustcap
- Injection molded foam surround with VAST™
- Dual Nomex progressive spiders with integrated lead wires
- Aluminum diecast frame with integrated heat sink fins
- Custom insulated push spring 10 AWG terminals
- Dual wound 2.5″ voice coil with interior/exterior windings
- Encapsulating voice coil to former coupling technology (patent pending)
- Detachable die cast aluminum trim ring
- Vented pole piece
- High temp high energy neodymium motor structure
- Proprietary split yoke pass thru motor technology (patent pending)
- Integrated copper cap heat sinking shorting ring (IDHS)
- Optional grille insert available
- Optimized for sealed enclosures
SKU: n/a -
Mobile subwoofers, Power Subwoofers, Rockford Fosgate
Rockford Fosgate T2S1-13 Power 13″ T2 Single 1-Ohm Subwoofer
Mobile subwoofers, Power Subwoofers, Rockford FosgateRockford Fosgate T2S1-13 Power 13″ T2 Single 1-Ohm Subwoofer
Power 13″ T2 Single 1-Ohm Subwoofer
The Power T2S1-13 subwoofer features 13-inches of effective radiating cone area and a single 1-ohm voice coil for ease of wiring.
- Three layer glass fiber/Aramid honeycomb/Glass fiber cone
- Aluminum dustcap
- Injection molded foam surround with VAST™
- Proprietary surround mechanical clamping ring
- Dual Nomex progressive spiders with integrated lead wires
- Aluminum diecast frame with integrated heat sink fins
- Custom push spring insulated 8 AWG terminals
- Single layer edge wound aluminum 4″ voice coil
- Detachable die cast aluminum trim ring
- Vented pole piece
- Triple stack segmented ferrite motor structure
- Integrated aluminum heat sinking shorting ring (IDHS)
SKU: n/a -
Mobile subwoofers, Power Subwoofers, Rockford Fosgate
Rockford Fosgate T2S1-16 Power 16″ T2 Single 1-Ohm Subwoofer
Mobile subwoofers, Power Subwoofers, Rockford FosgateRockford Fosgate T2S1-16 Power 16″ T2 Single 1-Ohm Subwoofer
Power 16″ T2 Single 1-Ohm Subwoofer
The Power T2S1-16 subwoofer features 16-inches of effective radiating cone area and a single 1-ohm voice coil for ease of wiring.
- Three layer glass fiber/Aramid honeycomb/Glass fiber cone
- Aluminum dustcap
- Injection molded foam surround with VAST™
- Proprietary surround mechanical clamping ring
- Dual Nomex progressive spiders with integrated lead wires
- Aluminum diecast frame with integrated heat sink fins
- Custom push spring insulated 8 AWG terminals
- Single layer edge wound aluminum 4″ voice coil
- Detachable die cast aluminum trim ring
- Vented pole piece
- Triple stack segmented ferrite motor structure
- Integrated aluminum heat sinking shorting ring (IDHS)
SKU: n/a -
Mobile subwoofers, Power Subwoofers, Rockford Fosgate
Rockford Fosgate T2S2-13 Power 13″ T2 Single 2-Ohm Subwoofer
Mobile subwoofers, Power Subwoofers, Rockford FosgateRockford Fosgate T2S2-13 Power 13″ T2 Single 2-Ohm Subwoofer
Power 13″ T2 Single 2-Ohm Subwoofer
The Power T2S2-13 subwoofer features 13-inches of effective radiating cone area and a single 1-ohm voice coil for ease of wiring.
- Three layer glass fiber/Aramid honeycomb/Glass fiber cone
- Aluminum dustcap
- Injection molded foam surround with VAST™
- Proprietary surround mechanical clamping ring
- Dual Nomex progressive spiders with integrated lead wires
- Aluminum diecast frame with integrated heat sink fins
- Custom push spring insulated 8 AWG terminals
- Single layer edge wound aluminum 4″ voice coil
- Detachable die cast aluminum trim ring
- Vented pole piece
- Triple stack segmented ferrite motor structure
- Integrated aluminum heat sinking shorting ring (IDHS)
SKU: n/a -
Mobile subwoofers, Power Subwoofers, Rockford Fosgate
Rockford Fosgate T2S2-16 Power 16″ T2 Single 2-Ohm Subwoofer
Mobile subwoofers, Power Subwoofers, Rockford FosgateRockford Fosgate T2S2-16 Power 16″ T2 Single 2-Ohm Subwoofer
Power 16″ T2 Single 2-Ohm Subwoofer
The Power T2S2-16 subwoofer features 16-inches of effective radiating cone area and a single 2-ohm voice coil for ease of wiring.
- Three layer glass fiber/Aramid honeycomb/Glass fiber cone
- Aluminum dustcap
- Injection molded foam surround with VAST™
- Proprietary surround mechanical clamping ring
- Dual Nomex progressive spiders with integrated lead wires
- Aluminum diecast frame with integrated heat sink fins
- Custom push spring insulated 8 AWG terminals
- Single layer edge wound aluminum 4″ voice coil
- Detachable die cast aluminum trim ring
- Vented pole piece
- Triple stack segmented ferrite motor structure
- Integrated aluminum heat sinking shorting ring (IDHS)
SKU: n/a -
Mobile subwoofers, Power Subwoofers, Rockford Fosgate
Rockford Fosgate T3-BMW-SUB Power BMW® 8” Direct Fit Subwoofer
Mobile subwoofers, Power Subwoofers, Rockford FosgateRockford Fosgate T3-BMW-SUB Power BMW® 8” Direct Fit Subwoofer
Power BMW® 8” Direct Fit Subwoofer
The Power T3-BMW-SUB is an 8” slim subwoofer designed as a direct fit replacement/upgrade for select BMW® models. Speaker features a BMW® factory connector and 150 watt power handling capacity.
SKU: n/a -
Mobile subwoofers, Power Subwoofers, Rockford Fosgate
Rockford Fosgate T3S1-19 Power 19″ T3 Single 1-Ohm Superwoofer
Mobile subwoofers, Power Subwoofers, Rockford FosgateRockford Fosgate T3S1-19 Power 19″ T3 Single 1-Ohm Superwoofer
Power 19″ T3 Single 1-Ohm Superwoofer
The Power T3S1-19 “superwoofer” has a whopping 19-inches of effective radiating cone area for deep bass and features a single 1-Ohm voice coil for easy wiring. This is the largest, most powerful subwoofer Rockford Fosgate has ever built!
- Three layer glass fiber/Aramid honeycomb/Glass fiber cone
- Aluminum dustcap
- Injection molded foam surround with VAST™
- Proprietary surround mechanical clamping ring
- Dual Nomex progressive spiders with integrated lead wires
- Aluminum diecast frame with integrated heat sink fins and venting
- Custom push spring insulated 4 AWG terminals
- Single layer edge wound aluminum 5″ voice coil
- Since voice coil design with dual (push/pull) windings
- Integrated die cast aluminum trim ring
- Dual gap multi-pole Neodymium push/pull motor structure
SKU: n/a -
Mobile subwoofers, Power Subwoofers, Rockford Fosgate
Rockford Fosgate T3S2-19 Power 19″ T3 Single 2-Ohm Superwoofer
Mobile subwoofers, Power Subwoofers, Rockford FosgateRockford Fosgate T3S2-19 Power 19″ T3 Single 2-Ohm Superwoofer
Power 19″ T3 Single 2-Ohm Superwoofer
The Power T3S2-19 “superwoofer” has a whopping 19-inches of effective radiating cone area for deep bass and features a single 1-Ohm voice coil for easy wiring. This is the largest, most powerful subwoofer Rockford Fosgate has ever built!
- Three layer glass fiber/Aramid honeycomb/Glass fiber cone
- Aluminum dustcap
- Injection molded foam surround with VAST™
- Proprietary surround mechanical clamping ring
- Dual Nomex progressive spiders with integrated lead wires
- Aluminum diecast frame with integrated heat sink fins and venting
- Custom push spring insulated 4 AWG terminals
- Single layer edge wound aluminum 5″ voice coil
- Since voice coil design with dual (push/pull) windings
- Integrated die cast aluminum trim ring
- Dual gap multi-pole Neodymium push/pull motor structure
SKU: n/a -
Power Subwoofers
T0D210
The T0D210 subwoofer mimics its performance and design from our older Power Series brothers. Our T0 10” features dual 2-Ohm voice coils, 550 Watts RMS power handling, and includes a grille with integral trim ring.
- Anodized aluminum heat sinking dust cap
- Anodized aluminum voice coil former
- High-temp voice coil with spun-laced Nomex® re-inforcement collar
- Kevlar fiber reinforced paper cone
- Optimized and matched magnetic and complicance geometry
- Optimized pole piece and spider venting
- Periodic-stitched fatigue resistant tinsel lead wire
- Proprietary 8 AWG insulated allmetal input spring terminal connection
- Rigid die-cast aluminum basket
SKU: n/a -
Power Subwoofers
T0D212
The T0D212 subwoofer mimics its performance and design from our older Power Series brothers. Our T0 12” features dual 2-Ohm voice coils, 700 Watts RMS power handling, and includes a grille with integral trim ring.
- Anodized aluminum heat sinking dust cap
- Anodized aluminum voice coil former
- High-temp voice coil with spun-laced Nomex® re-inforcement collar
- Kevlar fiber reinforced paper cone
- Optimized and matched magnetic and complicance geometry
- Optimized pole piece and spider venting
- Periodic-stitched fatigue resistant tinsel lead wire
- Proprietary 8 AWG insulated allmetal input spring terminal connection
- Rigid die-cast aluminum basket
SKU: n/a -
Power Subwoofers
T0D410
The T0D410 subwoofer mimics its performance and design from our older Power Series brothers. Our T0 10” features dual 4-Ohm voice coils, 550 Watts RMS power handling, and includes a grille with integral trim ring.
- Anodized aluminum heat sinking dust cap
- Anodized aluminum voice coil former
- High-temp voice coil with spun-laced Nomex® re-inforcement collar
- Kevlar fiber reinforced paper cone
- Optimized and matched magnetic and complicance geometry
- Optimized pole piece and spider venting
- Periodic-stitched fatigue resistant tinsel lead wire
- Proprietary 8 AWG insulated allmetal input spring terminal connection
- Rigid die-cast aluminum basket
SKU: n/a -
Power Subwoofers
T0D412
The T0D412 subwoofer mimics its performance and design from our older Power Series brothers. Our T0 12” features dual 4-Ohm voice coils, 700 Watts RMS power handling, and includes a grille with integral trim ring.
- Anodized aluminum heat sinking dust cap
- Anodized aluminum voice coil former
- High-temp voice coil with spun-laced Nomex® re-inforcement collar
- Kevlar fiber reinforced paper cone
- Optimized and matched magnetic and complicance geometry
- Optimized pole piece and spider venting
- Periodic-stitched fatigue resistant tinsel lead wire
- Proprietary 8 AWG insulated allmetal input spring terminal connection
- Rigid die-cast aluminum basket
SKU: n/a -
Power Subwoofers
T1D215
Innovative technologies allow the T1D215 subwoofer to perform like a larger woofer over the previous model. The T1 15” features dual 2-Ohm voice coils, 1,000 Watts RMS power handling, and includes a grille with integral trim ring.
- Symmetrical dual progressive roll tear resistant poly-cotton spiders
- Periodic-stitched fatigue resistant tinsel lead wire
- Proprietary 8 AWG insulated allmetal input spring terminal connection
- High-temp voice coil with spun-laced Nomex® re-inforcement collar
- Optimized and matched magnetic and complicance geometry
- Anodized aluminum heat sinking dust cap
- Kevlar fiber reinforced paper cone
- Rigid die-cast aluminum basket
- Optimized pole piece and spider venting
- Anodized aluminum voice coil former / copper clad aluminum wire
SKU: n/a -
Power Subwoofers
T1D410
nnovative technologies allow the T1D410 subwoofer to perform like a larger woofer over the previous model. The T1 10” features dual 4-Ohm voice coils, 600 Watts RMS power handling, and includes a grille with integral trim ring.
- Symmetrical dual progressive roll tear resistant poly-cotton spiders
- Periodic-stitched fatigue resistant tinsel lead wire
- Proprietary 8 AWG insulated allmetal input spring terminal connection
- High-temp voice coil with spun-laced Nomex® re-inforcement collar
- Optimized and matched magnetic and complicance geometry
- Anodized aluminum heat sinking dust cap
- Kevlar fiber reinforced paper cone
- Rigid die-cast aluminum basket
- Optimized pole piece and spider venting
- Anodized aluminum voice coil former / copper clad aluminum wire
SKU: n/a -
Power Subwoofers
T1D412
Innovative technologies allow the T1D412 subwoofer to perform like a larger woofer over the previous model. The T1 12” features dual 4-Ohm voice coils, 800 Watts RMS power handling, and includes a grille with integral trim ring.
- Symmetrical dual progressive roll tear resistant poly-cotton spiders
- Periodic-stitched fatigue resistant tinsel lead wire
- Proprietary 8 AWG insulated allmetal input spring terminal connection
- High-temp voice coil with spun-laced Nomex® re-inforcement collar
- Optimized and matched magnetic and complicance geometry
- Anodized aluminum heat sinking dust cap
- Kevlar fiber reinforced paper cone
- Rigid die-cast aluminum basket
- Optimized pole piece and spider venting
- Anodized aluminum voice coil former / copper clad aluminum wire
SKU: n/a -
Power Subwoofers
T1D415
Innovative technologies allow the T1D415 subwoofer to perform like a larger woofer over the previous model. The T1 15” features dual 4-Ohm voice coils, 1,000 Watts RMS power handling, and includes a grille with integral trim ring.
- Symmetrical dual progressive roll tear resistant poly-cotton spiders
- Periodic-stitched fatigue resistant tinsel lead wire
- Proprietary 8 AWG insulated allmetal input spring terminal connection
- High-temp voice coil with spun-laced Nomex® re-inforcement collar
- Optimized and matched magnetic and complicance geometry
- Anodized aluminum heat sinking dust cap
- Kevlar fiber reinforced paper cone
- Rigid die-cast aluminum basket
- Optimized pole piece and spider venting
- Anodized aluminum voice coil former / copper clad aluminum wire
SKU: n/a -
Power Subwoofers
T2D212
The upgraded Power T2D212 subwoofer has a new bad-ass look having revised components over the previous model. The T2 12” features dual 2-Ohm voice coils, 1,200 Watts RMS power handling, and includes an aluminum trim ring.
- Rigid die-cast aluminum basket
- Precision cast aluminum alloy basket
- High excursion Thermo-Rubber surround
- Parabolic triangular cone geometry support system
- Removable and reversible screw concealing ring
- Embedded 12 AWG tinsel leads / dual 8 AWG slot loaded wiring terminal
- Anodized aluminum voice coil former
- Mirror image symmetrical spiders
- Flat edge wound copper clad aluminum voice coil
- Optimized pole piece and spider venting
- Optimized for both sealed and vented enclosures
- Custom insulated/isolated compression terminals
- Spun-Laced Nomex collar
SKU: n/a